Comparison of satellite receivers Openbox S2 HD and Openbox SX4 HD

Satellite receivers Openbox S2 HD and Openbox SX4 HD are relatively inexpensive devices. Each of them has its own characteristics that should be considered when choosing this type of apparatus. Let’s take a closer look at the S2 HD and SX4 devices.

Both models have a built-in DVB-S2 tuner, which allows you to view channels in MPEG-2, MPEG-4 formats, as well as in high definition HDTV. However, these devices have different software installed..

The Openbox S2 HD receiver uses proprietary software, and the Openbox SX4 HD model uses an open-source Linux platform. As an improvement, the latest model uses a new processor that allows you to view channels in high quality and using 3D graphics. In addition, thanks to the new processor, it became possible to view three-dimensional channels..

Satellite receivers allow you to view the channels of various providers. These devices provide the ability to use cards of various encodings: Viaccess, Irdeto, Conax. However, it will be possible to install the module for receiving Tricolor broadcasting only in the second device, since it works with the CI + standard. This small drawback is compensated by the ability to implement cardsharing in any convenient way. This can be done via LAN or another connector provided in some models. The same connectors can be used to connect to the Internet, to watch videos, open some sites. Also, through these connectors you can update the software..

The satellite receivers Openbox S2 HD and openbox sx4 provide the ability to record broadcasts. This can be done via the USB connector by connecting any external storage device. The same connector can be used to read movies stored on the drive, JPEG, MP3, various formats, to change software or to enable the Timeshift function..

When choosing between S2 and SX4 receivers, be sure to decide on which cable the receiver will connect to the TV. These devices have different connectors. So, the Openbox S2 HD receiver has SCART, HDMI and SPDIF. And the SX4 receiver only has RCA, HDMI and SPDIF. When using the maximum number of outputs, you can connect two TVs to one unit at once, and also reproduce sound in the Dolby Digital format.